BlueSolar PWM-Light 12/24V

www.victronenergy.com
Features
- Load output with low battery voltage disconnect function.
- Lighting control function, one timer only.
- Two digit seven segment display for quick and easy setting of the load output functionality, including
timer setting.
- Three stage battery charging (bulk, absorption, float), not programmable.
- Load output protected against over load and short circuit.
- Protected against reverse polarity connection of the solar array and/or battery.
Day/night timing options
See manual for details
BlueSolar PWM-Light Charge Controllers 12/24V
BlueSolar PWM-Light 10A
BlueSolar PWM-Light 12/24-5 12/24-10 12/24-20 12/24-30
Battery Voltage
12/24 V with automatic system voltage detection
Rated charge current
5A
10A
20A
30A
Automatic load disconnect
Yes
Maximum solar voltage
28V / 55V (1)
Self-consumption
< 10 mA
Load output Manual control + low voltage disconnect
Protection Battery reverse polarity (fuse) Output short circuit Over temperature
Overload protection
Shut down after 5 s in case of 160% load
Short circuit: immediate shut down
Grounding
Common positive
Operating temp. range -20 to +50°C (full load)
Humidity (non-condensing) Max 95%
BATTERY
Charge voltage 'absorption' 14.2V / 28,4V
Charge voltage 'float' 13.8V / 27,6V
Low voltage load disconnect
Low voltage load reconnect
13,1V / 26,2V (automatic)
ENCLOSURE
Protection class
IP20
Terminal size
5 mm² / AWG10
Weight 0,15kg
0,2kg
Dimensions (h x w x d)
70 x 133 x 33,5 mm (2.8 x 5.3 x 1.3 inch)
STANDARDS
Safety
IEC 62109-1
EMC
EN 61000-6-1, EN 61000-6-3, ISO 7637-2
1) For 12V use 36 cell solar panels
For 24V use 72 cell solar panels
or 2x 36 cell in series
2) The controller switches to the lower float voltage level 2
hours after the absorption voltage has been reached.
Whenever the battery voltage becomes lower than 13V, a new
charge cycle is triggered.

Summary of content (1 pages)