Victron SmartShunt Data Sheet

www.victronenergy.com
The
SmartShunt is an all in one battery monitor, only without a display. Your phone acts as
the display.
The SmartShunt connects via Bluetooth to the VictronConnect
App on your phone (or tablet)
and you can conveniently read out all monitored battery parameters, like state of charge,
time to go, historical information and much more.
Alternatively
, the SmartShunt can be connected and be read by a GX device. Connection to
the SmartShunt is made via a VE.Direct cable.
The SmartShunt is a good alternative for a BMV battery monitor, especially for systems
where battery monitoring is needed but less wiring and clutter is wanted.
The Smart
Shunt is equipped with Bluetooth, a VE.Direct port and a connection that can be
used
to monitor a second battery, for midpoint monitoring, or to connect a temperature
sensor.
Differences compared to BMV712 Battery Monitor
- No programmable visual and audible alarm.
- No programmable relay.
SmartShunt 500A / 1000A / 2000A
SmartShunt 500A
Basic SmartShunt wiring
Connecting a SmartShunt to a GX device
SmartShunt 1000A
SmartShunt 2000A