SmartSolar MPPT Manual
Table Of Contents
- MPPT solar charger manual
- Table of Contents
- 1. Safety precautions
- 2. Introduction
- 3. Features
- 4. Installation
- 5. Configuration and settings
- 6. Operation
- 7. Monitoring
- 8. Warranty
- 9. Troubleshooting and Support
- 9.1. The controller is not operational
- 9.2. Batteries are not charged
- 9.3. Batteries are undercharged
- 9.3.1. Too much DC load
- 9.3.2. Battery charge voltages are too low
- 9.3.3. The battery is almost full
- 9.3.4. Battery cable voltage drop
- 9.3.5. Temperature difference between solar charger and battery
- 9.3.6. Insufficient solar
- 9.3.7. Wrong temperature compensation setting
- 9.3.8. Battery charge current too low
- 9.4. Batteries are overcharged
- 9.5. Solar issues
- 9.5.1. PV reverse current too high
- 9.5.2. PV yield less than expected
- 9.5.3. Full rated output not reached
- 9.5.4. Max PV output power relates to battery voltage
- 9.5.5. Mixed PV panel types
- 9.5.6. PV connections burned or melted
- 9.5.7. MC4 connectors wrongly connected
- 9.5.8. Optimisers cannot be used
- 9.5.9. Earth fault detection missing
- 9.5.10. Ground current
- 9.6. Communication issues
- 9.7. Settings or firmware issues
- 9.8. Operation issues
- 10. Technical specifications
- 11. Appendix
11. Appendix
11.1. Dimensions 100/35 and 150/45
176
186
71.5
25
5.4
A
Rev00
122 132
71
5
R4
8
DETAIL
A
4x
SCALE
1 : 1
Dimensions in mm
SCC020035000
BlueSolar MPPT 150/35
SCC020050200
BlueSolar MPPT 100/50
SCC110050210
SmartSolar MPPT 100/50
SCC115035210
SmartSolar MPPT 150/35
SCC115045212
SmartSolar MPPT 150/45
SCC115045222
BlueSolar MPPT 150/45
Dimension Drawing - SmartSolar charge controller
D
E
F
C
1
2
3
4
B
A
3
2
1
5
C
D
4
6
7
8
A
B
8
7
6
5
F
E
MPPT solar charger manual
Page 57 Appendix