SmartSolar MPPT Specifications

Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands
General phone: [phone] | E-mail: [e-mail]
www.victronenergy.com
Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other devices
Ultrafast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve
energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points may be present on the power-voltage curve.
Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP.
The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%. Full output current up to 40°C (104°F).
Flexible charge algorithm
Fully programmable charge algorithm (see the software page on our website), and eight preprogrammed algorithms,
selectable with a rotary switch (see manual for details).
Extensive electronic protection
- Over-temperature protection and power derating when temperature is high.
- PV short circuit and PV reverse polarity protection.
- PV reverse current protection.
Internal temperature sensor
Compensates absorption and float charge voltage for temperature.
Optional external battery voltage and temperature sensing via Bluetooth
A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to
one or more SmartSolar Charge Controllers.
Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts.
Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.
SmartSolar Charge Controller
MPPT 150/35
SmartSolar Charge Controller MPPT 150/35 MPPT 150/45
Battery voltage
12 / 24 / 48V Auto Select
(software tool needed to select 36V)
Rated charge current 35A 45A
Nominal PV power 1a, b)
35A 12V: 500W / 24V: 1000W / 36V: 1500W / 48V: 2000W
45A 12V: 650W / 24V: 1300W / 36V: 1950W / 48V: 2600W
Max. PV short circuit current 2) 40A 50A
Maximum PV open circuit voltage
150V absolute maximum coldest conditions
145V start-up and operating maximum
Maximum efficiency 98%
Self-consumption 12V: 20mA 24V: 15mA 48V: 10mA
Charge voltage 'absorption' Default setting: 14,4 / 28,8 / 43,2 / 57,6V (adjustable)
Charge voltage 'float' Default setting: 13,8 / 27,6 / 41,4 / 55,2V (adjustable)
Charge algorithm
multi-stage adaptive (eight pre-programmed algorithms)
Temperature compensation -16 mV / -32 mV / -64 mV / °C
Protection
PV reverse polarity / output short circuit / over-temperature
Operating temperature -30 to +60°C (full rated output up to 40°C)
Humidity 95%, non-condensing
Data communication port
VE.Direct
See the data communication white paper on our website
ENCLOSURE
Colour Blue (RAL 5012)
Power terminals 16 mm² / AWG6
Protection category IP43 (electronic components), IP22 (connection area)
Weight 1,25 kg
Dimensions (h x w x d) 130 x 186 x 70 mm
STANDARDS
Safety EN/IEC 62109-1, UL 1741, CSA C22.2
1a) If more PV power is connected, the controller will limit input power.
1b) The PV voltage must exceed Vbat + 5V for the controller to start.
Thereafter the minimum PV voltage is Vbat + 1V.
2) A PV array with a higher short circuit current may damage the controller.
SmartSolar Charge Controller MPPT 150/35 & 150/45
Bluetooth sensing
Smart Battery Sense
Bluetooth sensing
BMV-712 Smart Battery Monitor