Product Manual
Table Of Contents
8.2.2. Charger Mode - GRAPH tab
• Orion Smart [SERIAL NUMBER] confirms the connected device. A custom name can also be set if desired.
• Charger State Graph indicate in which state the charger currently is and show a short description of the current state.
8.2.3. Power Supply Mode
• Orion Smart [SERIAL NUMBER] confirms the connected device. A custom name can also be set if desired.
• Mode icon shows in which mode the Orion Smart is operating (Power Supply in this case)
• Input Voltage shows the voltage measured on the input terminals of the device
• Output voltage shows the voltage measured on the output terminals of the device
• When the Orion Smart is on Off state, it will not measure the output voltage, so this value will appear as '—'
• Off Reason shows the reason why the Orion Smart is disabled (appears under the “Power Supply Mode” text when the Orion
Smart is disabled)
8.3. Settings
VictronConnect allows the user to change and adjust several different settings from the Orion Smart. This is done through the
settings option that can be accessed by clicking the icon on the right top corner of the screen. The settings options are different
according to the operation mode that is selected.
8.3.1. Charger Mode
When on Charger Mode, these are the available settings.
Orion-Tr Smart DC-DC Charger Non-Isolated
Page 15
VictronConnect - Orion Smart DC-DC
Charger