Product Manual

Figure 5: Disable engine shutdown detection
When the engine shutdown detection has been switched off in Victron Connect (‘forced charging’) current will
be drawn from the starter battery even if the engine is not running.
During ‘forced charging’ the input voltage lockout is the only limit left to disable charging automatically, make
sure this level is not set too low, in most applications 12.5V is sufficiently low.
4.6. Cable and fuse recommendations
Figure 6: Cable and fuse recommendations
Minimum cable gauge
Voltage rating (Input or output) External battery protection
Fuse
0.5m 1m 2m 5m 10m
12 V 60 A 6mm
2
10mm
2
10mm
2
16mm
2
16mm
2
24 V 30 A 4mm
2
6mm
2
6mm
2
10mm
2
10mm
2
Orion-Tr Smart DC-DC Charger Non-Isolated
Page 7 Installation