Manual

8. Technical specifications
Blue Smart IP22 Charger 12V 15 / 20 / 30A 24V 8 / 12 / 16A
Input voltage and frequency range 180 - 265VAC | 45 - 65Hz
Efficiency 93% 94%
Standby power consumption 0.5W
Charge voltage - Absorption
Normal: 14.4V
High: 14.7V
Li-ion: 14.2V
Normal: 28.8V
High: 29.4V
Li-ion: 28,4V
Charge voltage - Float
Normal: 13.8V
High: 13.8V
Li-ion: 13.5V
Normal: 27.6V
High: 27.6V
Li-ion: 27.0V
Charge voltage - Storage
Normal: 13.2V
High: 13.2V
Li-ion: 13.5V
Normal: 26.4V
High: 26.4V
Li-ion: 27.0V
Max output current - Normal mode 15 / 20 / 30A 8 / 12 / 16A
Max output current - Low current mode 7.5 / 10 / 15A 4 / 6 / 8A
Max battery capacity (recommended) 150 / 200 / 300Ah 80 / 120 / 160Ah
Min battery capacity - Normal mode
Lead-acid: 50 / 67 / 100Ah
Lithium: 30 / 40 / 60Ah
Lead-acid: 27 / 40 / 53Ah
Lithium: 16 / 24 / 32Ah
Min battery capacity - Low current mode
Lead-acid: 25 / 33 / 50Ah
Lithium: 15 / 20 / 30Ah
Lead-acid: 13 / 20 / 27Ah
Lithium: 8 / 12 / 16Ah
Temperature compensation (lead-acid only) 16mV/°C 32mV/°C
Charge algorithm 6-stage adaptive
Power supply mode Yes
Back current drain 0.4Ah/month (0.6mA)
Protection Reverse polarity (fuse), output short circuit, over temperature
Cooling Low rpm (silent) fan (12/15 and 24/08 are without fan)
Operating temperature -20 to +50°C (full rated output up to 40°C)
Humidity (non condensing) Max 95%
Enclosure
Material & Colour Aluminium (blue RAL 5012)
Battery connection Screw terminals 16 mm² / AWG6
AC connection 1.5m cable with CEE 7/7, BS 1363 or AS/NZS 3112 plug
Protection category IP22 (indoor use)
Weight 1.3kg
Dimensions (h x w x d) 235 x 108 x 65mm
Standards
Safety EN 60335-1, EN 60335-2-29
Emission EN 55014-1, EN 61000-6-3, EN 61000-3-2
Immunity EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3
Automotive E4-10R
Blue Smart IP22 Charger
Page 27 Technical specifications