Product Card

www.victronenergy.com
Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands
General phone: [phone] | E-mail: [e-mail]
www.victronenergy.com
Battery Management System
The Lynx Smart BMS is a dedicated Battery Management System for Victron Lithium
Smart Batteries. It contains a positive and a negative busbar, a BMS, a contactor and a
battery monitor. It is part of the Lynx Distribution system.
The Lynx Smart BMS has a status LED and a Bluetooth LED.
The Lynx Smart BMS can communicate via Bluetooth with the VictronConnect app and
can communicate via VE.Can with an GX device.
VictronConnect app
The Lynx Smart BMS and up to 4 connected Lynx Distributors can be monitored and
setup with the VictronConnect app. For more information see the VictronConnect app
download page and the VictronConnect manual.
GX device
The Lynx Smart BMS and up to 4 connected Lynx Distributors can be monitored with a
GX device. For more information on the GX device see the GX device product page.
The GX device can be connected to the VRM portal allowing for remote monitoring.
For more information on the VRM portal see the VRM page.
Lithium Smart Batteries
The Lynx Smart BMS is a dedicated BMS for the Victron Energy range of Lithium Smart
batteries. These batteries are lithium iron phosphate (LiFePO4) batteries and are
available in 12.8V or 25.6V and in a variety of capacities. They can be connected in series,
parallel and series/parallel so a battery bank for system voltages of 12V, 24V or 48V can
be created. Up to four 12.8V batteries or two 25.6V batteries can be connected in series.
Up to 5 batteries or battery series strings can be connected in parallel.
For more information about these batteries see the Lithium Smart battery product page.
The Lynx Distribution System
The Lynx Distribution System consist of the following parts:
•
Lynx Power In
- A positive and negative busbar with 4 connections for batteries or
DC equipment.
•
Lynx Distributor
- A positive and negative busbar with 4 fused connections for
batteries or DC equipment together with fuse monitoring
•
Lynx Shunt VE.Can
- A positive busbar with a space for a main system fuse and a
negative busbar with a shunt for battery monitoring. It has VE.Can communication for
monitoring and setup with a GX device.
•
Lynx Smart BMS
- For use together with Victron Energy Smart Lithium batteries. It
contains a positive busbar with a contactor that is driven by a battery management
system (BMS) and a negative busbar with a shunt for battery monitoring. It has
Bluetooth communication for monitoring and setup via the VictronConnect App and
VE.Can communication for monitoring with a GX device and the VRM portal.
Lynx Smart BMS
Lynx Smart BMS
RJ45 VE.Can terminator
The Lynx Smart BMS ships
together with two VE.Can RJ45
terminators.
Lynx Smart front angle
The Lynx modules: Lynx Power In, Lynx Distributor, Lynx Shunt VE.Can and Lynx Smart BMS