Product Manual
Table Of Contents
- Lynx Smart BMS
- Table of Contents
- 1. Safety Precautions
- 2. Introduction
- 3. Features
- 4. Communication and interfacing
- 5. System Design
- 6. Installation
- 7. Commissioning the Lynx Smart BMS
- 8. Operation Lynx Smart BMS
- 9. Troubleshooting and Support
- 9.1. Lynx Smart BMS does not power up
- 9.2. Lynx Smart BMS operational issues
- 9.3. BMS issues
- 9.3.1. The BMS frequently disables the battery charger
- 9.3.2. The BMS is prematurely turning chargers off
- 9.3.3. The BMS is prematurely turning loads off
- 9.3.4. The pre-alarm setting is missing in VictronConnect
- 9.3.5. BMS is displaying alarm while all cell voltages are within range
- 9.3.6. How to test if the BMS is functional
- 9.3.7. System in sleep or hibernate mode
- 9.3.8. Battery communication error
- 9.4. Battery monitor issues
- 9.5. VictronConnect issues
- 9.6. GX device issues
- 10. Warranty
- 11. Technical specifications Lynx Smart BMS
- 12. Appendix
Lynx Smart BMS status VictronConnect
If the Lynx Smart BMS is connected to a GX device it can be monitored via the GX device and the VRM portal. This also includes
receiving alarms signals.
Lynx Smart BMS alarms on the VictronConnect App and GX device
This is a list of the alarm and error codes. For an explanation of these alarms and what to do on case of one of these errors or
alarms, consult the Troubleshooting and Support chapter [39].
Lynx Smart BMS
Page 36 Operation Lynx Smart BMS