Product Manual

12
5. Specifications
BlueSolar Charge
Controller
MPPT 100/30 MPPT 100/50
Battery voltage
12/24V Auto Select
Rated charge current
30A
50A
Nominal PV power, 12V 1a,b)
440W
700W
Nominal PV power, 24V 1a,b)
880W
1400W
Maximum PV open circuit
voltage
100V 100V
Max. PV short circuit current 2)
35A
60A
Maximum efficiency
98%
98%
Self-consumption
12V: 30 mA 24V: 20 mA
Charge voltage 'absorption'
Default setting: 14,4V / 28,8V (adjustable)
Charge voltage ‘equalization’ 3)
Default setting: 16,2V / 28,8V (adjustable)
Charge voltage 'float'
Default setting: 13,8V / 27,6V (adjustable)
Charge algorithm
multi-stage adaptive (eight preprogrammed algorithms)
or user defined algrithm
Temperature compensation
-16 mV / °C resp. -32 mV / °C
Protection
Battery reverse polarity (fuse, not user accessible)
PV reverse polarity, Output short circuit
Over temperature
Operating temperature
-30 to +60°C (full rated output up to 40°C)
Humidity
95%, non-condensing
Maximum altitude 5000m (full rated output up to 2000m)
Environmental condition Indoor type 1, unconditioned
Pollution degree PD3
Data communication port
VE.Direct (see the data communication white paper
on our website)
ENCLOSURE
Colour Blue (RAL 5012)
Power terminals 13 mm² / AWG6
Protection category
IP43 (electronic components),
IP22 (connection area)
Weight
1,3 kg
Dimensions (h x w x d)
130 x 186 x 70 mm
STANDARDS
Safety
EN/IEC 62109-1 / UL 1741 / CSA C22.2 NO.107.1-16
1a) If more PV power is connected, the controller will limit input power.
1b) The PV voltage must exceed Vbat + 5V for the controller to start.
Thereafter the minimum PV voltage is Vbat + 1V.
2) A higher short circuit current may damage the controller in case of reverse polarity connection of
the PV array.
3) Default setting: OFF