Product Manual

1. Safety precautions
1.1. General safety precautions
Read this manual carefully. It contains important instructions that need to be followed during installation,
operation and maintenance.
Save these instructions for future reference on operation and maintenance
Danger of battery explosion from sparking
Danger of electric shock
Install the product in a heatproof environment. Ensure therefore that there are no chemicals, plastic parts,
curtains or other textiles, etc. in the immediate vicinity of the equipment.
The product is not allowed to be mounted in a user accessible area.
Ensure that the equipment is used under the correct operating conditions. Never operate it in a wet
environment.
Never use the product at sites where gas or dust explosions could occur.
Ensure that there is always sufficient free space around the product for ventilation.
Refer to the specifications provided by the manufacturer of the battery to ensure that the battery is suitable for
use with this product. The battery manufacturer's safety instructions should always be observed.
Protect the solar modules from incident light during installation, e.g. cover them.
Never touch uninsulated cable ends.
Use only insulated tools.
This product is designed and tested in accordance with international standards. The equipment should be
used for the designated application only.
Connections must always be made in the sequence described in the Installation [9] chapter of this manual.
The installer of the product must provide a means for cable strain relief to prevent the transmission of stress to
the connections.
In addition to this manual, the system operation or service manual must include a battery maintenance manual
applicable to the type of batteries used.
MPPT solar charger manual
Page 1 Safety precautions