Full Product Manual

SKU No. :CE1009197 Product Size: Ø12.6"*H86" (Max) Light Source: A19 E26 LED Bulb
Installation instruction
1. Turn off the power
2. Dismantle the mounting plate subassembly as picture (1) from the lamp fixture body(E), then install the mounting plate(B) to J-Box with
the mounting screws(A).
3. Adjust the fixture's cable to the desired length.
4. Connect the fixture to a suitable ground in accordance with local electrical codes.
5. Connect the White wire to the neutral power line wire with a wire nut.
6. Connect the Black wire to the hot power line wire with a wire nut.
7. Neatly place all wires and wire nut connections inside the J-box.
8. Install the canopy(C) to ceiling with the flat screws(D).
9. Screw E26 LED bulb(F) into the the lamp-holder of lamp fixture body(E).
10. Install the bamboo lampshade(G) onto the lamp fixture body(E), then tighten it with the hand stud(H).
11. After finish the installation, turn on the power.
DIAGRAM OF
INSTALLATION STRUCTURE
Ø320 [12 5/8"]
A
B
C
D
E
F
G
H
350 [13 3/4"]
Ø120 [4 3/4"]
A
Mounting Screw (2×)
B
Mounting Plate
C
Canopy
D
Flat screw (2×)
Lamp Fixture Body E26 LED Bulb
(By others)
Bamboo Lampshade Hand Stud
E
F G H
L
N
Black wire
White wire
4" Octagonal J-box (By others)