Full Product Manual

SKU No. :CE1009205 Product Size: L6"*W6"*H86"(MAX) Light Source: (2×) LED Module
Installation instruction
Unpack and take out the fixture/accessories.
1. Turn off the power.
2. Dismantle the mounting plate(B) from the canopy(C), then install it to J-Box with mounting screws(A).
3. Adjust the fixture's cable to the desired length.
4. Connect the fixture to a suitable ground in accordance with local electrical codes.
5. Connect the White wire to the neutral power line wire with a wire nut.
6. Connect the Black wire to the hot power line wire with a wire nut.
7. Neatly place all wires and wire nut connections inside the J-box.
8. Install the canopy(C) to ceiling with 2PCS flat screws(D).
9. Screw 2PCS semicircular glass shades(F) into the the lamp fixture body(E).
10. After finish the installation, then turn on the power.
DIAGRAM OF
INSTALLATION STRUCTURE
A Mounting Screw (2×)
B
Mounting Plate
C
Canopy
D
Flat screw (2×)
152 [6"]
152 [6"]
355 [14"]
2180 [85 7/8"] MAX.
4" Octagonal J-box (By others)
"L" (Black Wire)
"N" (White Wire)
A
B
C
D
E
F
E
Lamp Fixture Body
F
Semicircular Glass Shade (2×)