Installation Guide

SKU No. :CE1013050 Product Size: Ø35 3/8"*H27 5/8" Light Source: 8 × B10 E12 Bulb
Installation instruction
1. Turn off the power.
2. Secure the decorative plate(C) by mounting caps(D).
3. Slip loop at bottom of hanging rods (B) over hook on top of frame (A).
4. Slip loop at top of hanging rods (B) over hook on wire housing (G).
5. Determine desired hanging height of fixture. Cut chain (H) to length to achieve desired height.
6. Slip quick link(M) at end of chain (H) onto loop on top of wire housing (G).
7. Fasten mounting hardware(K) to junction box with machine screws.
8. Weave fixture wires through chain links, skipping every other chain link.
9. Slip threaded ring (L) down ,position the threaded ring (L) and canopy(J) over end of chain (H) with fixture wires.
10. Raise the fixture up to the ceiling and do the wire connection. Place the canopy(J) over the junction box and secure with threaded ring (L).
11. Screw recommended bulbs(E) (E12 B10 bulb type, not included) into sockets.
12. Install the glass shades(F) onto the sockets.
13. After finish the installation, turn on the power.
DIAGRAM OF
INSTALLATION STRUCTURE
L
M
A: Frame
B: Hanging rods
C: Decorative Plate
D: Caps
E: B10 E12 bulbs(Not Included)
F: Glass shades
G: Wire housing
H: Chain
I: Collar loop
J: Canopy
K: Mounting hardware
L: Threaded ring
M:Quick link
1000 [39 3/8"]
Ø120 [4 3/4"]
20 [3/4"]
241 [9 1/2"]
701 [27 5/8"]
1707 [67 1/4"]
Ø900 [Ø35 3/8"]
4" Octagonal J-box (By others)