Instruction manual

• For Headrests with a Straight bottom: route the straps on the outside
of the Headrest Posts.
o Keep the straps straight (as shown below) to create a secure
fit.
NOTE: The end of the case with the velcro straps must be positioned at
the top of the headrest.
6. Insert the ends of each strap into the buckles.
7. Tighten the case to the headrest by pulling the loose ends of each strap.
The case should be tightly held against the headrest.
8. Prepare your DVD for playback. (Follow the PLAY A DVD instructions on
page 5)
NOTE: When the DVD player is inside the Auto Headrest Case the IR
Receiving Lens (19) of the DVD player will be located at the top of the Auto
Headrest Case. To use the Remote you must raise up the Remote so the IR
beam can point downward toward the top of the case as shown below.