Instruction manual

Widescreen TV
! 4:3 PS: Will automatically edit and show a Widescreen or
other format movie/video as a Full screen image
! 4:3 LB: Will keep the image in the same format according to
the content on the DVD. Widescreen DVDs will be displayed
in a letterbox format.
o OSD LANGUAGE - Select the language (English, French, or
Spanish) used for the On Screen Displays & Setup Menu.
o LAST MEMORY - When this setting is turned ON the DVD player will
remember the spot where DVD playback was stopped, and resume
playback from the same spot the next time the disc is inserted. If this
setting is turned OFF, DVD playback will always start from the
beginning of the disc.
• PREFERENCE SETUP
o TV TYPE (NTSC / PAL) - This setting is determined by the type of
TV the DVD player is connected to. In North America (USA, Canada,
& Mexico) the NTSC system is the correct setting. Consult your TV
instruction manual if you have any questions on if your TV uses the
NTSC or PAL system.
o AUDIO LANGUAGE - Select the default language (English, French,
or Spanish) for DVD playback.
o SUBTITLE LANGUAGE - Select the default subtitle language
(English, French, Spanish, or Off).
o PASSWORD - The default password “0000”. After this correct
password is entered you can then change the password to a four
digit number of your choice using the Number buttons (22) on the
Remote.
! NOTE: Your password is needed to change the Parental
Control Settings.
o PARENTAL - To restrict the viewing of certain movie ratings,
Parental Controls can be accessed on this menu. In order to set or
change these settings, the password must first be entered. After
entering the password simply highlight the maximum acceptable
rating and press the OK button (8) on the DVD player or the ENTER
button (8) on the Remote to confirm the highlighted rating.