User Manual

iAuto Series Scan Tool User Manual V1.0
6
● Oil Light Service/Reset – Reset oil service light, oil inspection light, service mileage,
service intervals and more.
● EPB – Diagnosis and advanced service function of the electric parking brake system
● BRT – Battery configuration
● DPF – Diesel particulate filter regeneration
● TBA/TPS – Throttle body alignment
● TPMS – Tire Pressure Measuring Sensor Reset
● SAS – Steering angle sensor calibration
● AFS – Adaptive Front Lighting System
● AF – Adjust Fuel
● SRS – Supplemental Restraint System,include Airbag Reset
● ABS – Anti-Block Brake System
● Sunroof Initialization
● Suspension Match
● Gearbox Match
● ABS Bleed
● Gear Learning
● Immobilizer Programming
● Odometer Calibration
● Injector Coding
2.1 Vehicle Identification
The vehicle identification information presented is provided by the ECM of the vehicle being
tested. Therefore, certain attributes of the test vehicle must be entered into the scan tool to
ensure the data displays correctly. The vehicle identification sequence is menu driven, you simply
follow the screen prompts and make a series of choices. Each selection you make advances you
to the next screen.
It typically identifies a vehicle by any of the following means, The options available vary by vehicle
manufacturer, not all the following options are available for all vehicles.
●
Automatic VIN acquisition
●
Manual VIN entry
●
Manual vehicle selection
●
Vehicle data recorder
2.1.1 Automatic VIN Acquisition
Automatic VIN Acquisition only available on some manufacturers. It allows to identifying a vehicle
by automatically requesting the vehicle identification number (VIN).
1. When a vehicle make has been selected, the following screen displays. Select VIN acquisition
from the menu, and press the OK key.