User Manual
Table Of Contents
- General Notice
- Safety Precautions and Warnings
- 1 Getting Started
- 2 Diagnostic Operations
- 3 Common Special Services/Functions
- 3.1 Oil Light Service/Reset
- 3.2 ABS bleeding
- 3.3 Battery matching
- 3.4 Electronic Parking Brake (EPB) Service
- 3.5 Diesel Particulate Filter (DPF) Regeneration
- 3.6 TPS(Throttle Body Alignment)
- 3.7 Steering Angle Sensor (SAS) Calibration
- 3.8 TPMS Adaptation
- 3.9 Immobilizer
- 3.10 Injector Coding
- 3.11 Gear Learning
- 3.12 Suspension Match
- 3.13 Sunroof Initialization
- 3.14 Gearbox Match
- 3.15 Ajuste Fuel
- 3.16 Odometer Calibration
- 3.17 AFS (Adaptive Front Lighting System)
- 4 OBDII/EOBD Diagnostics
- 5 Playback Data
- 6. Software Update and Printing
iAuto Series Scan Tool User Manual V1.0
9
2.1.4 Save a Tested Vehicle Info.
The scan tool is able to save a tested vehicle by creating a Vehicle Record. It provides quick
identification of previously tested vehicle(s).
1. Identify the vehicle by any of the means above, and run an automatic system test by selecting
Auto Scan.
2. When the test finished, press the function key Save on the screen, and a screen with a virtual
keyboard displays.
3. Enter a unique name for this vehicle and save it, and you will see this new vehicle in Vehicle
Data Recorder menu.