User Manual

iAuto Series Scan Tool User Manual V1.0
18
3 Common Special Services/Functions
This section gives brief instructions of the most commonly required service and maintenance
operations. Typical service operation screens are a series of menu driven executive commands.
Follow on-screen instructions to complete the operation.
Service and maintenance functionalities can be found under the main menu(iAuto700, iAuto702,
iAuto702PRO,iAuto704,iAuto710,iAuto720 and iAuto730) or Maintenance
menu(iAuto701),meanwhile they can be found under the specific control module.
3.1 Oil Light Service/Reset
a)If the service lamp is on, you must provide service for the car. After service, you need to reset
the driving mileage or driving time so that the service lamp turns off and the system enables the
new service cycle. b)After changing engine oil or electric appliances that monitor oil life, you need
to reset the service lamp.
3.2 ABS bleeding
When the ABS contains air, the ABS bleeding function must be performed to bleed the brake
system to restore ABS brake sensitivity.
If the ABS computer, ABS pump, brake master cylinder, brake cylinder, brake line, or brake fluid
is replaced, the ABS bleeding function must be performed to bleed the ABS.
3.3 Battery matching
Use the car diagnostic device to reset the car battery monitoring unit to clear original fault
information about insufficient battery electric quantity, and match the battery again and monitor
battery based on current battery information.
Battery matching must be performed in the following cases: a) Main battery is replaced. Battery
matching must be performed to clear original electric quantity insufficiency information and
prevent the related control module from detecting false information. If the related control module
detects false information, it will invalidate some electric auxiliary functions, such as automatic
start&stop function, sunroof without one-key trigger function, power window without automatic
function. b) Battery monitoring sensor. Battery matching is performed to re-match the control
module and motoring sensor to detect battery electric quantity use information more accurately,
which can avoid the instrument panel displaying false information.
3.4 Electronic Parking Brake (EPB) Service
EPB Service menu allows you to perform the service and maintenance of brake systems,
including deactivation and activation of the brake control system, bleeding brake fluid, opening