User Manual
Table Of Contents
- General Notice
- Safety Precautions and Warnings
- 1 Getting Started
- 2 Diagnostic Operations
- 3 Common Special Services/Functions
- 3.1 Oil Light Service/Reset
- 3.2 ABS bleeding
- 3.3 Battery matching
- 3.4 Electronic Parking Brake (EPB) Service
- 3.5 Diesel Particulate Filter (DPF) Regeneration
- 3.6 TPS(Throttle Body Alignment)
- 3.7 Steering Angle Sensor (SAS) Calibration
- 3.8 TPMS Adaptation
- 3.9 Immobilizer
- 3.10 Injector Coding
- 3.11 Gear Learning
- 3.12 Suspension Match
- 3.13 Sunroof Initialization
- 3.14 Gearbox Match
- 3.15 Ajuste Fuel
- 3.16 Odometer Calibration
- 3.17 AFS (Adaptive Front Lighting System)
- 4 OBDII/EOBD Diagnostics
- 5 Playback Data
- 6. Software Update and Printing
iAuto Series Scan Tool User Manual V1.0
25
Or
3. Use the UP/DOWN key to highlight a test group and press the OK key to confirm. A screen with
details of the selected sensor displays. Use the up and down arrow keys to scroll through data
to select lines, and left and right arrow keys to scroll back and forth through different screens of
data.
4. Press the ESC key to exit and return.
4.8 Component Test
Component Test allows the code reader to control operation of vehicle components, tests or
systems.
1. Use the UP/DOWN key to highlight Component Test from Diagnostic Menu and press the OK
key.
2. Use the UP/DOWN key to highlight a system or component, press the OK key to start test and
the code reader displays the message “Command Sent!”
3. Press the ESC key to exit and return.
4.9 Request Vehicle Information
Vehicle Information allows to request the vehicle’s VIN number, calibration ID(s) which identifies
software version in vehicle control module(s), calibration verification numbers (CVN(s)) and
in-use performance tracking on model year 2000 and newer OBDII compliant vehicles.