User Manual
Table Of Contents
- General Notice
- Safety Precautions and Warnings
- 1 Getting Started
- 2 Diagnostic Operations
- 3 Common Special Services/Functions
- 3.1 Oil Light Service/Reset
- 3.2 ABS bleeding
- 3.3 Battery matching
- 3.4 Electronic Parking Brake (EPB) Service
- 3.5 Diesel Particulate Filter (DPF) Regeneration
- 3.6 TPS(Throttle Body Alignment)
- 3.7 Steering Angle Sensor (SAS) Calibration
- 3.8 TPMS Adaptation
- 3.9 Immobilizer
- 3.10 Injector Coding
- 3.11 Gear Learning
- 3.12 Suspension Match
- 3.13 Sunroof Initialization
- 3.14 Gearbox Match
- 3.15 Ajuste Fuel
- 3.16 Odometer Calibration
- 3.17 AFS (Adaptive Front Lighting System)
- 4 OBDII/EOBD Diagnostics
- 5 Playback Data
- 6. Software Update and Printing
iAuto Series Scan Tool User Manual V1.0
26
CVNs are calculated values required by OBD II regulations. They are reported to check if
emission-related calibrations have been changed. Multiple CVNs may be reported for a control
module. It may take several minutes to do the CVN calculation.
To request vehicle information:
1. Use the UP/DOWN key to highlight Vehicle Info. from Diagnostic Menu and press the OK key.
Follow on-screen instruction and send the command to read vehicle information.
2. Use the UP/DOWN key to highlight an available option and press the OK key. A screen with
details of the selected option displays.
3. Press the ESC key to exit and return.
5 Playback Data
The PlayBack data function allows viewing test results recorded by the scan tool.
1. Select PlayBack from home screen and press the OK key.
2. A screen with a list of test records displays. If no data is recorded, the message “No Data
available!” is displayed.