User Manual
Table Of Contents
- General Notice
- Safety Precautions and Warnings
- 1 Getting Started
- 2 Diagnostic Operations
- 3 Common Special Services/Functions
- 3.1 Oil Light Service/Reset
- 3.2 ABS bleeding
- 3.3 Battery matching
- 3.4 Electronic Parking Brake (EPB) Service
- 3.5 Diesel Particulate Filter (DPF) Regeneration
- 3.6 TPS(Throttle Body Alignment)
- 3.7 Steering Angle Sensor (SAS) Calibration
- 3.8 TPMS Adaptation
- 3.9 Immobilizer
- 3.10 Injector Coding
- 3.11 Gear Learning
- 3.12 Suspension Match
- 3.13 Sunroof Initialization
- 3.14 Gearbox Match
- 3.15 Ajuste Fuel
- 3.16 Odometer Calibration
- 3.17 AFS (Adaptive Front Lighting System)
- 4 OBDII/EOBD Diagnostics
- 5 Playback Data
- 6. Software Update and Printing
iAuto Series Scan Tool User Manual V1.0
29
3. Once installed, open the iScanzilla software, click the Register button and complete the registration
form to create your user account.
Alternatively, you can click the Sign Up button on the right upper side of our website to create an user
account.
6.2 Registration part 2 - Add your tool to the account
Note: For new user of Vident products(iLink&iAuto series), when you insert TF card into
computer and run iScanzilla, registration is automatically finished.
For user who already have one scan tool(iLink&iAuto series)registered, please register as
follows:
To register the tool, you will need the tool's Serial Number and 'Register Password'.
You can find these on the tool by selecting Setup > About.