User Manual
Table Of Contents
- General Notice
- Safety Precautions and Warnings
- 1 Getting Started
- 2 Diagnostic Operations
- 3 Common Special Services/Functions
- 3.1 Oil Light Service/Reset
- 3.2 ABS bleeding
- 3.3 Battery matching
- 3.4 Electronic Parking Brake (EPB) Service
- 3.5 Diesel Particulate Filter (DPF) Regeneration
- 3.6 TPS(Throttle Body Alignment)
- 3.7 Steering Angle Sensor (SAS) Calibration
- 3.8 TPMS Adaptation
- 3.9 Immobilizer
- 3.10 Injector Coding
- 3.11 Gear Learning
- 3.12 Suspension Match
- 3.13 Sunroof Initialization
- 3.14 Gearbox Match
- 3.15 Ajuste Fuel
- 3.16 Odometer Calibration
- 3.17 AFS (Adaptive Front Lighting System)
- 4 OBDII/EOBD Diagnostics
- 5 Playback Data
- 6. Software Update and Printing
iAuto Series Scan Tool User Manual V1.0
3
1.5.1 Select Language
English is the default language.
1. Select Language from Setup menu and press the OK key.
2. Press the LEFT/RIGHT arrow key select a language and press the OK key to confirm.
1.5.2 Unit of Measure
To change the unit setup:
1. Select Units from Setup menu and press the OK key.
2. Press the LEFT/RIGHT arrow key select an item and press the OK key to save and return.
1.5.3 Beeper set
The default setting is Beep on.
1. Select Beep Set from Setup menu and press the OK key.
2. Press the LEFT/RIGHT arrow key to set the beep on or off and press the OK key to save.