User Manual
Table Of Contents
- General Notice
- Safety Precautions and Warnings
- 1 Getting Started
- 2 Diagnostic Operations
- 3 Common Special Services/Functions
- 3.1 Oil Light Service/Reset
- 3.2 ABS bleeding
- 3.3 Battery matching
- 3.4 Electronic Parking Brake (EPB) Service
- 3.5 Diesel Particulate Filter (DPF) Regeneration
- 3.6 TPS(Throttle Body Alignment)
- 3.7 Steering Angle Sensor (SAS) Calibration
- 3.8 TPMS Adaptation
- 3.9 Immobilizer
- 3.10 Injector Coding
- 3.11 Gear Learning
- 3.12 Suspension Match
- 3.13 Sunroof Initialization
- 3.14 Gearbox Match
- 3.15 Ajuste Fuel
- 3.16 Odometer Calibration
- 3.17 AFS (Adaptive Front Lighting System)
- 4 OBDII/EOBD Diagnostics
- 5 Playback Data
- 6. Software Update and Printing
iAuto Series Scan Tool User Manual V1.0
4
1.5.4 Key Test
This function checks if the keys are working properly.
1. Select Key Test from Setup menu and press the OK key.
2. Press any key to start test. The virtue key corresponding with the key you pressed will be
highlighted on the screen if it works correctly. Otherwise, the key is not functioning properly.
3. Click the F2 function key twice to exit.
1.5.5 LCD Test
LCD test checks if the LCD is working properly.
1. Select LCD Test from Setup menu and press the OK key to start test. Check if there are any
missing spots in the LCD screen.
2. When completed, press the ECS key to exit.
1.5.6 About
Selecting About option opens a screen that show information about your scan tool, such as serial
number and register password which may be required for product registration.