Installation guide

Video Clarity, Inc. Page 10 of 12
7.3 CV-DVI-Output Module
The DVI/VGA Output Module consists of a Dual-output DVI/VGA card. The primary output is the Windows
Desktop and the ClearView User Interface. The secondary output is a dedicated, video-only output controlled
by ClearView. When ClearView is not running, the output should be an extension of the Windows desktop.
Note: To send to a VGA monitor, use one of the included DVI/VGA adapters.
7.4 CV-DVI-I-720 Module
The model -720 has a single DVI Input connector and a single DVI pass-through connector. If your source
device looks for a monitor’s EDID, you must have a DVI monitor attached to the pass-through connector
which is capable of displaying the video format you would like to capture.
Note: unless you have the CV-DVI-Output module installed. In this case, you can attach the monitor to output
#2).
Note2: To capture VGA analog video, use one of the included DVI/VGA adapters.