Installation guide

Video Clarity, Inc. Page 8 o f 12
6 Licenses
ClearView has 2 licenses:
• ClearView license, which enables the various hardware modules
• 3rd-party Drastic license for various file imports
ClearView was shipped fully licensed; however, changes such as machine ID, user name, firewall settings,
etc. may require a refresh of the licenses.
Note: if you have a dual-boot machine (Windows XP Professional 32-bit and Windows XP Professional 64-
bit), then you will need to do the following procedures 2 times – one for each operating system.
After putting your machine on the network and updating the firewall, security settings,
• Double click on the ClearView icon
• If you receive a License Error, then
o Select Start -> Programs -> Video Clarity -> ClearView Licenser.
o A popup will appear which is named ClearView Licenser. Please copy the entire text from the
grey-out box, and mail it to [e-mail]. Note: the text should look like
“Version VX.X User XXXXXXXXXXX (WinNT VX.X [Build XXXX] 0)”.
o Go to <C>:\Program Files\Drastic\MediaReactor if running in Windows 32bit. Note: The root
drive may not be <C:>, and in 64 bit mode Program Files is Program Files (x86).
o Select/Run DTMRLicense.exe
o Place either your or the primary users email and name in the first 2 boxes.
o Press Generate and the Site Code will appear
o Copy the Site Code, and mail it to [e-mail]
It is possible that the ClearView license is correct, but the 3
rd
-party Drastic license needs to be refreshed. To
check this:
• Double click on the ClearView icon
• Launch Windows Explorer
• Choose the CV Media Drive (probably the E: drive)
• Choose Clips
• Choose BMPs
• Choose SportsBMP
• Drag Sports80030.bmp onto the ClearView Desktop
• Press Load in the File Import Pane
• If you get a MediaRead License Error then
o Go to <C>:\Program Files\Drastic\MediaReactor if running in Windows 32bit. Note: The root
drive may not be <C:>, and in 64 bit mode Program Files is Program Files (x86).
o Select/Run DTMRLicense.exe
o Place either your or the primary users email and name in the first 2 boxes.
o Press Generate and the Site Code will appear
o Copy the Site Code, and mail it to [e-mail]