Specifications

Rev. 8.1.1 of 99

Choose a Video Output

The Video Output controls ClearView’s uncompressed video format to be displayed on external monitors,

and also affects the input format during record.

Figure 8: Video Output Device Module SD, HD or 4K

Note: For 4K format playback and output interface configuration requirements, see hardware module

section CV-SDI-IO-4K.

Table 2: Video Output Pane Descriptions

Output Device

The list of Output Devices depends on the optional ClearView Output Modules

installed. Three possible Output Devices are selected from a pull-down menu:

 No Video Output Module – display a preview of the video Y’CbCr, RGB,

ARGB, RGBA in the GUI on the DVI/VGA desktop display.

 Display Port Output Module – DP1.2 or DVI-DL display RGB (10 bit)

onto the secondary DP1.2 display and on the primary DVI/VGA display.

 Broadcast Output Module – display Y’CbCr onto the HD-SDI Monitor and

display RGB on HDMI, up to 4K with One (1) or Two (1 & 2) Modules.

Video Format

The list of available input and output resolutions/frame rates depends upon

the Output module user selections.

 No Video Output Module has no restrictions, and has Create New feature

 The Display Port Output Module is restricted by the EDID codes defined

by the second display’s capabilities.

 The Broadcast Output Module conforms to broadcast specifications

provided by DVB and SMPTE.

Analog Output

Defines the type of analog output when using the Broadcast Output Module

(i.e. Composite, S-Video or Component). The Output is sent out the selected

analog output and simultaneously to SD/HD/3G SDI.