User`s manual

MICRO DVR MENUS

5.2.1 MOTION (ON / OFF): Select ‘ON’ if you want to use motion detection.

5.2.2 SESITIVITY (LOW / NORMAL / HIGH): You can select the extent of sensitivity for motion detection.

The higher the sensitivity is, the better the reaction the Clock/Radio DVR has to small motion.

5.2.3 MOTION MARK (ON / OFF): Select ‘ON’ if you want to display motion mark on the monitor.

5.3 SCHEDULE SETUP

The recording time can be scheduled on this menu. Up to 4 schedules can be set up. Configure period of time

when recording is available.

6. SEARCH

The recorded files in SD Memory can be easily searched through the ‘SEARCH’ menu. After entering the

searching option into the fields, click ‘SEARCH’ to retrieve search results

MICRO DVR MENUS

3. RECORD MODE

3.1 OVERWRITE (ON/OFF): If this option is ON, recording keeps going on by deleting old recorded files

when SD memory storage capacity is full. If it is OFF, the recording session stops when all SD Memory

is full.

3.2 PRE ALARM (ON/OFF): If this option is ON, event recording starts several seconds ahead of actual

event triggered time. The alarm pre-recording time differs according to video quality setting.

4. VIDEO QUALITY

4.1 LEVEL (HIGH / NORMAL / LOW): Select desired video level from ‘LOW’ to ‘HIGH’.

Compression Bitrate for High: 1.2Mbps

Compression Bitrate for Normal: 750Kbps

Compression Bitrate for Low: 500Kbps