User Manual LCD Television Model No: 325LDF 323LD 263LD Series 3/5
Welcome Thank you for purchasing a Videocon LCD Television. Please take time to carefully read this user operating manual paying special attention to the section detailing “Warnings and Safety Precautions”. Being familiar with all of the operational functions of your new TV will greatly improve your viewing enjoyment. Please keep this guide safe for your future reference. Do not touch any parts inside the TV or make changes to any settings not described in this user guide! Table of Contents 1. 2. 3. 4. 5.
2. Warnings and Safety Precautions Do not remove the rear cover – do not attempt to service the product yourself. Removing covers can expose you to high voltage and other dangerous conditions leading to serious injury or death. Request a qualified agent to perform servicing. Do not expose TV to direct sunlight or other heat sources – to prevent fire, never place any type of candle or naked flame on the top or near to the TV set.
Warnings and Safety Precautions Do not allow anything to rest upon or roll over the power cord – and do not place the TV where the power cord is subject to damage or left trailing in a position that could cause someone to trip leading to injury and/ or damage to the product. Remove the AC plug from the wall outlet – when the TV is not in use for a prolonged period of time and before going to bed. Ensure that the mains plug is easily accessible at all times.
3. Initial Setup Before Starting Please note the following important points! 1. Two people should lift or carry the TV! 2. Ensure you have plenty of space to work in safely! 3. A screw driver is required to fit the stand! 4. When fitting the stand ensure that the area you lay the TV face down on, is flat, stable and cushioned to prevent damage to the screen! 5. Carefully remove the TV and accessories from the box supplied in – retain this and any packaging for 28 days before disposing of.
Initial Setup Notes on wall mounting the TV Wall mount items (sold separately) allow you to wall mount this TV onto a wall. For detailed information on installing the wall mount, please see the instructions provided with the specific bracket. Contact a technician for assistance when installing the TV on a wall mounted bracket. • DO NOT install your wall mount while the TV is turned on. It may result in personal injury due to electric shock.
4. Operating Controls and Connections Remote Control Unit The information on this page will help you to identify remote control function keys. Keys A – F highlight the important keys used for tuning and Menu selection and is referenced further in the user’s manual as a guide. 3. 4. 5. 6. 7. 8. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28.
Operating Controls and Connections Operating Controls/ Names and Functions Front (Right Side) Controls 1 2 1. LED INDICATOR the light is blue when the power is on and red when TV is in stand-by mode. 2. REMOTE CONTROL SENSOR aim the remote control at this spot on the TV 3. VOLUME UP increase the volume 4. VOLUME DOWN decrease the volume 5. CHANNEL UP (CH+) access next TV channel 6. CHANNEL DOWN (CH-) access previous TV channel 7.
Operating Controls and Connections Operating Controls/ Names and Functions Rear Connections 13 14 15 16 17 18 19 20 11 21 23 22 24 12 10 25 26 fig 2 10. AC INPUT TERMINAL 11. SCART 1/ SCART 2 12. SIDE CONNECTION PANEL - see fig 2 - expanded 13. AUDIO IN L2 (For Component) - LEFT 14. AUDIO IN R2 (For Component) – RIGHT 15. AUDIO IN R1 (For Video/ S Video) - RIGHT 16. Pr/ Cr Component In 17. AUDIO IN L1 (For Video/ S Video) - LEFT 18. Pr/ Cb Component In Component In 19.
5. Basic Connection and Switching the TV On Basic TV Connection and Switching On/ Off KEY CONTROLS 1. Connect your aerial lead into the ANT IN socket on the rear of the TV – see fig 2. 2. Connect the mains lead (supplied) into the TV and plug into an appropriate household socket. Use AC 100 ~ 240V power outlet for the TV power supply. The apparatus must be connected to a mains outlet with a protected earthing connection - see fig 2. 3. The red standby light on the front of the TV will illuminate.
6. Digital Tuning: First Installation First Installation Remote Control Unit: Ensure that the remote control is in TV mode – press the TV key (G - fig 1) – the remote will now operate the TV.. With the TV connected and switched on as described previously follow the steps below to tune into Digital TV broadcasts. DIGITAL TV TUNING When the TV is switched on for the first time it may default to Analogue Tuner Mode (Standard TV) – To start Digital Tuning you must switch the TV into DTV Mode.
Digital Tuning - Troubleshooting Digital TV Tuning Issues TV Stations Stored in an Incorrect Program Position If after initial DTV Tuning is complete, channels are stored in an unusual or incorrect order (e.g. BBC1 on program 7), or certain channels seem to be missing from the usual free to air line up - you may need to initiate first installation again. To do this you will need to perform a Factory Reset on the DTV Tuner memory.
Analogue TV Tuning: First Installation First Installation Remote Control Unit: Ensure that the remote control is in TV mode – press the TV key (G - fig 1) – the remote will now operate the TV.
Analogue TV Tuning: First Installation First Installation ANALOGUE (STANDARD) TV CHANNEL SORTING If, after auto tuning, the TV Channels received are stored in an incorrect order you will need to manually sort them into the correct program position. Please follow the steps below. You should already be in the TV Tuner mode – following on from the previous page. 1. Press the ATV MENU key (F), the ATV Menu appears on screen displaying the “Video” menu. 2.
7. General Troubleshooting Before you call the service agent, please check the following points. Please bear in mind that malfunctions can also be caused by external influences or equipment. PROBLEM POSSIBLE CAUSES/ RESOLVE Mains adapter not plugged in to mains socket or back of TV ? Is the standby light on? Is the aerial connected ? Is the TV switched on ? Is it in standby (red light) ? No picture, no sound.
8. Using your Television Controls Applicable for Digital and Analogue TV Viewing This section details how to operate your TV set now it is installed and tuned in. The first section highlights the key controls applicable to both Digital TV and Analogue TV viewing.
Using your Television PICTURE/ SOUND RECALL Press the “Picture” key to reset picture colour/ contrast/ brightness levels etc to previous settings. Press the “Sound” key to reset audio – treble/ bass/ balance levels etc to previous settings . DISPLAY Calls up “on screen” information of TV status - display source, program/ channel, and programme information etc. To turn off OSD press the DISPLAY key again or await timeout. SUBTL Press the SUBTL key to enable or disable subtitles.
Using your Television EPG (ELECTRONIC PROGRAMME GUIDE) – DTV Only! Press this button to access the Electronic Programme Guide. An “On Screen Display” appears detailing the programme schedule listings for the remainder of that day. Use the left/ right ARROW keys to select a different day – the EPG system stores 8 days worth of information for each channel. Use the up/ down ARROW keys to scroll through the days listings – as a programme is highlighted information about it will be displayed.
9. Menu Operation ADJUSTING TV SETTINGS This section will help you in navigating the menu systems used for adjusting TV parameters. The On Screen Menu’s are very easy to operate, simply use the ARROW keys and ENTER key on the remote control to access all functionality.Before starting , please press [TV] key on the remote control There are two menu’s on this TV. 1.
Menu Operation ATV MENU LIST - For Main Menu – (Press ATV MENU Key) VIDEO MENU User Dynamic Video mode Standard Mild Game Color Temp Cool Warm Noise Reduction Advance Contrast Brightness Colour Tint Sharpness This menu is for selecting the pre-set picture settings. Pre programmed settings are available as well as the user settings also available in addition you can also use PICTURE button on remote to select various picture settings.
Menu Operation ATV MENU LIST - (Continued) TIME MENU Current Time 00:00 to 23:59 Off Time 00:00 to 23:59 On Time, On Program 00:00 to 23:59, 0 to 199 Reminder Channel, Reminder Time 0 to 199, 00:00 to 23:59 Auto Sleep 0,10,20,30,60,90, 120,180,240 Minutes This setting displays the time set by user as a Current Time. This parameter used to switch the TV set into standby at time preset by the user.
Menu Operation ATV MENU LIST - (Option Menu Continued) Child Lock/ Hotel Mode ATV MENU Child Lock and Hotel Mode Notes. For any Child Lock/ Hotel Mode parameters to function – the Child Lock ENABLE and Hotel Mode ENABLE (ON/ OFF) option must be ON.
Menu Operation DTV MENU LIST - For Main Menu – (Press DTV MENU) 1. FAVOURITE LISTS Create a Favourite List FAVOURITE LISTS Name Channels Modify a Favourite List Radio TV This screen allows you to create a new favourite channels list with selection criteria. The name of the list is set to “FAV 1/2” for TV services and “RFAV 1/2” for Radio. This screen allows you to modify a favourite list. The current favourite list name is displayed on the top of the screen.
10.
Connecting External Equipment to the TV These figures are just for reference ANT IN :To view television channels correctly, a signal must be received by the set from one of the following sources: An outdoor aerial / A cable television network / A satellite network COMPONENT IN: Connect component video cables (not supplied) to component connector ("PR", "PB", "Y") on the rear of your set and the other ends to corresponding component video out connectors on the DTV or DVD.
Connecting External Equipment to the TV S-VIDEO or VIDEO / R-AUDIO-L Connect RCA or S-VIDEO cable (not supplied) to an appropriate external A/V device such as VCR, DVD or Camcorder. Connect RCA audio cables (not supplied) to "RAUDIO-L" on your set and the other ends to corresponding audio out connectors on the A/V device.
Connecting External Equipment to the TV PC IN [PC] / [AUDIO]: Connect to the video and audio output jack on your PC or Laptop. 1. 2. 3. Press the SOURCE key on the remote control Use the up/ down ARROE keys to select VGA Press ENTER to display PC SETTING UP THE TV WITH YOUR PC/ LAPTOP SCREEN menu is available only for VGA input and deactivated for other input sources. The actual screens on your PC may be different depending upon your particular version of Windows and your particular video card.
12. Disposal Instructions CORRECT DISPOSAL OF THIS PRODUCT (Waste Electrical & Electronic Equipment) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Helpline Number 0845 293 7697
