Operation Manual

Using the remote control
This section provides information on using the remote control. The infrared remote control provides
access to the main functions of your DRX-601ESM and also advanced facilities such as presets and
dynamic range control. Before using your remote, insert the supplied batteries. Aim the remote control
at the sensor on the display panel.
Preset buttons
The numbered buttons (1-9) and the STORE button enable you to store
your favourite radio services for one-touch access.
To store a service
While listening to the service you want to store.
1. Press the STORE button.The display shows 1-9?
2. Press a numbered button to store the service under that
number.
To recall a previously stored channel
Press the numbered button under which you stored the service.
DRC button
The DRC Dynamic Range Control button enables you to alter the dynamic
range of the received audio (dependent on broadcast material) by making
the quieter sounds in a broadcast more audible. This may be useful in
noisy environments or particularly quiet parts of programmes.
Press the DRC button, the display indicates whether DRC is available for
the current service, if DRC is available, press the DRC button again to
toggle DRC on or off for that service. The default setting is off.
Press the DISPLAY button to return to normal display mode.
If you want to apply DRC to another service, select the service and repeat.
MUTE button
The MUTE button is a quick way of reducing the output volume.
11
1. Press the MUTE button to mute the sound.The display shows MUTE.
2. Press any button on the remote control or main unit to return to the
previous volume.
DISPLAY button
The DISPLAY button enables you to change the display mode. This button
performs the same function as the Display button the main unit. See page
10 for details.
Press the DISPLAY button and repeat or hold down to cycle through the
four display options.