Operation Manual

12
PRI/SEC button
The PRI/SEC button enables you to select between the primary and
secondary services where secondary services are available. If a
secondary service is available for the current service, the Secondary LED
will light up on the front of your DRX-601ESM. See page 13 for an
explanation of primary and secondary services. Press the PRI/SEC button
and repeat or hold down to cycle through the available services.
INFO button
The INFO button enables you to change the information mode. This button
performs the same function as the Info button on the main unit. See page 9
for details.
Press the INFO button and repeat or hold down to cycle through the two
information modes. Press the DISPLAY button to return to normal display
mode.
Service select buttons
The !" and SELECT buttons enable you to cycle through and select
services. Together, these buttons perform the same function as the large
tuning knob on the main unit.
1. Press and release or hold down the ! or " button to cycle through
the stored services.
2. The bottom line of the display shows the service names.
3. Press the SELECT button to listen to the displayed service.