Operation Manual

Connecting to your aerial
You need to connect either the supplied indoor aerial or an external
DAB aerial to your DRX-601ESM to receive digital radio
transmissions. Refer to page 15 for information on the
different types of aerials available. For information on
how to find out about DAB coverage in your area, see
page 14.
1. Screw the aerial plug onto the F-type AERIAL
connector on the rear of your DRX-601ESM.
2. For the best reception, if using the indoor aerial supplied, attach the
aerial horizontally to a wall using some adhesive tape and extend
the arms on the end of the aerial wire vertically into a ‘T’ shape on its
side, as illustrated above.
Connecting to an external
decoder
The RDI (Receiver Data Interface) optical connector provides access to raw
multiplex data. This may be used in the future to connect to an external
decoder or computer for access to extra services.
Connecting to power supply
Once all audio connections are complete as described above, connect
one end of the supplied power lead to your DRX-601ESM and the other
end to a wall outlet.
7