Operation Manual

Selecting a service
Once you have tuned your DRX-601EX as explained above you can select the digital radio service you want to listen
to. You use the large turn-and-push knob to select a service.
1. Rotate the large tuning knob to see the names of other stored services on the bottom line of the display. Stop
when you find the service you want to listen to.
2. Push and release the large tuning knob to listen to the service you have selected.
If the service you select is in stereo, the Stereo LED will light up. If the service you select has one or more secondary
services available, the Secondary LED will light up.
See page 12 for information on primary and secondary services and see page 10 for details on selecting primary or
secondary services.
Changing the display mode
The DRX-601EX display feature has four modes which enable you to view different parts of the broadcast data on the
bottom line of the display.
Press the Display button on the front panel of your DRX-601EX and repeat or hold down to cycle through the four
different display modes.
8
Scrolling text The default mode, displays scrolling text messages which accompany the audio, where
available.
Program Type A label describing the type of content being broadcast by the service.
Multiplex name Displays the name of the Multiplex in which the current service is found. See the
Guide to Digital Radio section on page 12 for information on Multiplexes.
Technical Information Displays the channel label and centre frequency for the current multiplex. See the
Guide to Digital Radio section on page 12 for information on channels and digital
radio frequencies.