Operation Manual

MUTE button
The MUTE button is a quick way of reducing the output volume from your DRX-601EX.
1. Press the MUTE button to mute the sound.
The display on your DRX-601EX shows MUTE.
2. Press any button on the remote control or main unit to return to the previous volume.
DISPLAY button
The DISPLAY button enables you to change the display mode on your DRX-601EX. This button performs the same
function as the Display button the main unit. See page 8 for details.
Press the DISPLAY button and repeat or hold down to cycle through the four display options.
INFO button
The INFO button enables you to change the information mode on your DRX-601EX. This button performs the same
function as the Info button on the main unit. See page 9 for details.
Press the INFO button and repeat or hold down to cycle through the two information modes. Press the DISPLAY
button to return to normal display mode.
Service select buttons
The !" and SELECT buttons enable you to cycle through and select services. Together, these buttons perform the
same function as the large tuning knob on the main unit.
1. Press and release or hold down the ! or " button to cycle through the stored services.
2. The bottom line of the display on your DRX-601EX shows the service names.
3. Press the SELECT button to select and listen to the displayed service.
PRI/SEC button
The PRI/SEC button enables you to select between the primary and secondary services where secondary services
are available. If a secondary service is available for the current service, the Secondary LED will light up on the front
of your DRX-601EX. See page 12 for an explanation of primary and secondary services. Press the PRI/SEC button
and repeat or hold down to cycle through the available services.
11