Operation Manual

Connecting to power supply
Once you have connected your aerial, and any other audio devices, connect one end of the supplied power lead to
the socket on the side of your digital radio and connect the other end to a wall outlet.
Setting up
This section provides information on connecting your aerial and connecting to any other devices. Connector sockets are provided on the side and
rear panels of your DRX-601EX. Before connecting other devices to your DRX-601EX, switch both devices off. For a quick setup you can connect just
your aerial and power supply - the other connections listed are optional and will not prevent normal operation of the unit.
5
Connecting to an external amplifier
You can connect your DRX-601EX to an external amplifier. This may be a stand alone unit or it may be built into your
existing hi-fi system or powered speakers.
Connect the OUTPUT sockets to the Tuner-in sockets on the back of your amplifier using a stereo phono cable.
Connecting your aerial
You need to connect either the supplied telescopic indoor aerial or an external DAB aerial to your DRX-601EX to
receive digital radio transmissions. To find out about DAB coverage in your area, see the list of useful addresses on
page 13.
1. Screw the aerial plug onto the F-type aerial connector on the side of your digital radio.
2. For the best reception, if using the indoor aerial supplied, extend the aerial fully. You may have to experiment
with different angles to find the best reception for particular services. Just like with FM reception, you may find
that you want to move the radio around your living space to find the best location for reception - near a window
should provide optimum reception.