Operation Manual

6
Connecting to digital devices
Your DRX-601E/ES can provide digital audio output for connection to digital devices such as MiniDisc, CD-R or DAT
recorders or the digital input on your amplifier.
1. Locate the S/PDIF sockets on the back of your DRX-601E/ES and the digital-in socket on your digital device.
2. Connect the devices via either the coaxial or the optical socket using a suitable cable. Suitable connecting
cables are available from VideoLogic, see page 19 for details.
Connecting to an auxiliary source
If you have an existing radio tuner, portable CD/MiniDisc player or similar you can connect it through your DRX-
601EX. When the source selection switch is set to AUX IN, you will hear the auxiliary device through the speakers on
your DRX-601EX.
Connect the INPUT sockets to the output socket(s) on your auxiliary device using the supplied 3.5mm to stereo
phono cable or a stereo phono cable as appropriate.
Switch the source selection switch on the side panel to the AUX IN position.
Note To resume listening to digital radio set the source selection switch back to the RADIO position.
Connecting to an external decoder
The RDI (Receiver Data Interface) optical connector provides access to raw multiplex data. This may be used in the
future to connect to an external decoder or computer for access to extra services.