User`s guide

16 VIDEOMAN
.VIDEOMAN Digital.
ㆍ Security
- Hide camera (Display) : The camera will not display its images on the monitor.
- Remove from CCTV display : the selected camera will not be displayed on the CCTV during
the auto-switch rotation.
(LIVCAP-When CCTV auto switching interval is “Normal” this will not apply.)
- Remove from network display : Blocks from being displayed to remote connections
ㆍ Compress format & rate
: Change compression rate. (moving bar to the left makes image file size smaller but at the
same time quality of image gets lower.)
ㆍ Transmission format & rate
: Adjust compression rate for transmitting data to remote client.
ㆍ Pre & Post alarm recording
: In order to enable this, you should select “Motion” or “Sensor” in 'Scheduling' menu.
- Pre : Recording frame number prior to a Motion detection or Sensor trigger.
- Post : Recording frame number after a Motion detection or Sensor trigger.
ㆍ Event notification
- Video loss - Notification : Choose event for Video Loss. (Refer to 5-7. Event Setup
)
Click “Apply” or “Save & Close” to save and apply changed setting.
5-4-2. Scheduling
Select the desired time (by hour and day-of-the-week) in which to record images displayed by the
camera.