User manual

ADPRO
®
XOa Client Software User Manual
21796_05_preliminary 103
12.4.6 Active Sensor Event Profile
An active sensor event profile is defined to send alarms for all detections to all transmission destinations.
This alarm is only generated when the operational state of the video system is armed.
This alarm profile also triggers input I201, thus activating the active sensor. Input I201 is used to inform the
user that some sensors are still active. This will prevent arming the system while sensors are still in alarm.
Furthermore, the alarm transmission will be repeated every 15 minutes as long as the alarm is sustained.
When the end of alarm is detected, a new alarm message will be sent to indicate that the alarm is no longer
sustained.
The profile type is 0 – Alarm (generic profile type). Note that you cannot modify the profile type of the
standard alarm profiles.