User manual

ADPRO
®
XOa Client Software User Manual
21796_05_preliminary 23
2.4.4 Changing a Server
The first time you connect to a server, you use the default values. If you have modified any settings in the
client (IP address, ports, password…), you also have to change these in the Login screen. To change a
server, proceed as follows:
1. Launch the XOa client (in its own window).
2. Select the desired server in the list, and then click Edit.
3. Change the necessary settings.
4. Click OK to confirm.
2.4.5 Setting Date and Time
The first time that you connect to a server, set the date and time. This ensures that the correct timestamp
appears on recordings and logs.
Changing the date/time settings requires a system restart.
Caution!
If you turn back the clock, the system may erase existing recordings. For example, you need to
turn the clock back from 16:00 h to 15:30 h. Any existing recordings that were already made
between 15:30 h and 16:00 h may be erased after you set the clock back to 15:30 h.
If available, you can let the server synchronise with an NTP server (Network Time Protocol server).
Note
If you experience any instability with the NTP server when using a dynamic NTP address, then
enter the DNS server of your Internet Service Provider in the advanced settings for the Ethernet
connection: choose System > Connections > Ethernet/PPP, click Advanced mode, and fill in
the Provider DNS Server box.