User manual

User Manual ADPRO
®
XOa Client Software
26 21796_05_preliminary
3.1.2 Ethernet Connection
Enter all necessary information for the Ethernet connection in this section.
Click Advanced mode to define the Dynamic DNS settings.
Parameter
Description
Default value
MAC address
Shows the MAC address of your video system.
–
IP address
Enter the IP address of the server.
Do not use reserved addresses!
10.0.0.10
Subnet mask
Enter the subnet mask.
255.255.255.0
Gateway
Set the gateway (= IP address of the router).
10.0.0.1
Provider DNS server
Enter the provider DNS server. The server needs this
information to be able to connect to the Dynamic DNS server.
When using internet over Ethernet this field is optional,
because certain protocols have been programmed in the
software, when the internet connection is only available via a
3G modem (in the PPP section), this field is obligatory.
–
Dynamic DNS server
Choose the correct provider from the list.
Note
First the Dynamic DNS account (with any
Dynamic DNS service provider) needs to be set
up.
None
Dynamic DNS user
Enter the username you have received from your provider for
the Dynamic DNS account.
–
Dynamic DNS pass
Enter the password you have received from your provider for
the Dynamic DNS account.
–
Dynamic DNS host
Enter the host you have received from your provider for your
Dynamic DNS account.
–
Max. bandwidth
This limits the total bandwidth used by the video system. This
may affect image rate, but not the image quality, during live
viewing.
The value is expressed in kbps.
–
Currently used
bandwidth
This shows the current bandwidth usage, both the value and
the graphical view. The value is expressed in kbps.
–