User manual
User Manual ADPRO
®
XOa Client Software
60 21796_05_preliminary
Positioning Time
(sec.)
PTZ preset positions can be selected via an input. When that input triggers the PTZ
action, the camera will move to the configured PTZ preset position, but the alarm
message of the input will be delayed until the PTZ preset positioning time has
expired. Thus no blurry images are recorded for quad images.
Note
When the Auto-Home Expire Time has been configured, the analytics detection will be
suppressed during PTZ movement. Only when the camera has returned to the home position,
the analytics detection will resume.
5.2.7 Recording
Continuous/Pre/Post
quality
This shows the quality that has been configured for continuous recordings and for
pre and post event recording.
Event quality
This shows the quality that has been configured for the event recording.
Set the recording parameters by clicking the desired quality.
Fps
The number of frames per second (1–25)
Resolution
The number of pixels per image; depends on the camera type
VBR
Selects a variable bitrate compression (Qlow, Qnormal or Qhigh)
CBR
Selects a compressed bitrate compression (value 20–2048 kbps); the higher the
value, the higher the compression and the lower the loss of quality; the
compression levels will differ according to the constant data flux in which the file
size is predictable, but the quality will depend on the video contents.
VBR with Qnormal quality is recommended!
Click Save.
5.3 List of Available PTZ Protocols
The server supports the following PTZ protocols:
360 Vision / Vantage Juno / VT Fastrax-P /
Xeno Neodome
Amux IEC
Baxall ZMX
Baxall ZTX
BBV
Burle/Philips/Bosch
COHU
Pacom
Panasonic (conventional)
Panasonic (new)
Pelco D
Pelco D (no zoom speed)
Pelco P
Samsung
Sensormatic