User Manual

Videoswitch VDM Digital Recorder

Vdm601t.doc 19

6 Viewing Live Images

6.1 Enter Live Mode

Press the LIVE key to enter LIVE mode

6.2 Live Display Modes

6.2.1 Full Screen Main Monitor

1..16

Select full screen views of different cameras by pressing the keys Camera 1, 2, 3 etc

6.2.2 Spot Monitor

The spot monitor output is a completely independent monitor output that always displays a full screen live

image.

ALT

and

1..16

Select cameras on the spot monitor by pressing the ALT key in combination with the

keys 1, 2, 3 etc

6.2.3 Picture-in-Picture

To view a Picture-in-Picture image on the main monitor, press the PIP key.

1..16

The camera select keys may then be used to select the main camera displayed in the main part

of the image. You may alternatively specify that these keys select the PIP image via the SETUP

menu (SETUP/Display/PIP mode).

Press the LEFT, RIGHT, UP, DOWN keys to move the PIP image to the required part of the

screen.

To swap the main and the PIP image, press:

ALT

and

Press the ALT key in combination with the

key to exchange the two displayed

images while in PIP mode. If both images are the same, press one of the camera

keys 1..16 to change the main image.

To exit the PIP mode, press the

, or key.

6.2.4 Quad

Press the quad key to view four pictures at once on the screen. If there are more than four

cameras, you can press it again to see another four of the cameras.