User Manual

Videoswitch VDM Digital Recorder

Vdm601t.doc 20

6.2.5 9-way and 16-way Multi-Screen

If you have a VDM-9 or VDM-16, press multi-screen key to view nine pictures at once on the

screen. If you have a VDM-16, press multi-screen key again to view sixteen pictures at once on the

screen.

6.2.6 Zoom

To magnify a full-screen live image, you must enter LIVE mode (section 6.1) then:

ALT

and

Press the ALT key and the ZOOM key to enter zoom mode.

Use the cursor keys to move around the image to see the magnified part that you

require

To exit zoom mode, press the ALT and key again.

6.3 Auto-Sequencing

6.3.1 Auto-Sequencing Main Monitor

ALT

and

Select auto-sequencing on the main monitor to by pressing the ALT and the

keys. Auto sequencing is cancelled by pressing these two keys again, or by

pressing any camera select key.

The auto-sequence symbol is displayed at the top of the screen on the main monitor when sequencing is

enabled.

If a PIP image is being displayed, the main image will normally be sequenced. You may alternatively specify

sequencing of the PIP via the SETUP menus (SETUP/Display/PIP mode).

If quads are being displayed and there are more than four cameras installed, selecting auto-sequence will

cause the quads to sequence.

You may specify that only some of the cameras are to be included in the sequence. Refer to the SETUP

menu (SETUP/ User Menu /Auto Sequence (Main)/Camera List).

You may also specify the dwell time on each camera (SETUP/Display/Auto Sequence (Main)/Dwell Times).

6.3.2 Auto-Sequencing Spot Monitor

ALT

and

Select auto-sequencing on the spot monitor to by pressing the ALT and the

keys.

Auto sequencing is cancelled by pressing these two keys again.

The auto-sequence symbol is displayed at the top of the screen on the main monitor when sequencing

is enabled.

You may specify that only some of the cameras are to be included in the sequence. Refer to the SETUP

menu (SETUP/User Menu/Auto Sequence (Spot)/Camera List).

You may also specify the dwell time on each camera (SETUP/Display/Auto Sequence (Spot)/Dwell Times).