User Manual

Videoswitch 21 Pos601a.doc
Vi-POSCON Installation Guide
7.2 Setting the Active Channels
You can connect up to four video inputs to the Vi-POSCON controller. For each video input
connected, you must activate a video input channel. The default setting for the number of active video
input channel for Vi-POSCON is one. The channels are sequentially connected and activated from
position 1 to 4. The default setting is 1 Channel.
To set the number of active video input channels:
Highlight and click ACTIVATE CHANNELS on the SERVICE MENU. The NUMBER OF CHANNELS
window appears.
Highlight and click the number of channels to activate. The SERVICE MENU reappears displaying the
number of channels activated.
7.3 Setting the Language
You can configure Vi-POSCON to operate in a choice of languages. The default setting is English
(UK).
NOTE: When selecting the language, everything will change, including the menus you need to
change it back.
Perform the following steps to change the language setting:
Highlight and click Language on the SERVICE MENU. The LANGUAGE window appears.
Selecting >>> more >>> displays additional language choices:
Highlight and click the language you want to use. The following message window briefly appears in
the selected language.
The SERVICE MENU reappears in the selected language.
1 Channel
2 Channels
3 Channels
4 Channels
NUMBER OF CHANNELS
English (UK)
English (US)
French
German
Spanish
Portuguese
Polish
Greek
English – Greek
Finnish
>>> more >>>
LANGUAGE
<<< back <<<
Hungarian
Danish
Czech
Russian
LANGUAGE
Please wait for
the new font
to be loaded.
MESSAGE