User Manual

Videoswitch 25 Pos601a.doc
Vi-POSCON Installation Guide
7.9.5 Setting the Alarm Status
Use this option to enable or disable the current alarm. The default setting is Disabled.
Highlight and click Alarm Status on the ALARM MENU. The EVENT STATUS menu appears.
Highlight and click the option for the current alarm. The ALARM MENU reappears displaying the
selected status.
7.9.6 Setting the Alarm Duration
Use this option to set the length of time the alarm is displayed on the monitor. The default setting is 30
Seconds.
Highlight and click Alarm Duration on the ALARM MENU. The SET EVENT TIME menu appears.
Highlight and click Increment to increase or Decrement to decrease the alarm time by one second
for each click.
Highlight and click Exit to save the setting. The ALARM MENU reappears displaying the alarm
duration time.
7.9.7 Setting the Active Period
Use this option to set the period that the alarm is active. The default setting is All.
Highlight and click Active Period on the ALARM MENU. The ACTIVE PERIOD menu appears.
Highlight and click All to set the alarm for all day (24 hours) or
Highlight and click Timed to enable the alarm for a shorter period. Use the Start Time and End Time
options to set the active period.
The ALARM MENU reappears displaying the selected active period.
7.9.8 Setting the Start Time
Use this option to set the start time of a timed alarm's active period. The default setting is 00:00.
Highlight and click Start Time on the ALARM MENU. The SET TIME menu appears.
Highlight and click the item (hour, minute) to set. Each click increases (increments) or decreases
(decrements) the item by one unit.
Enabled
Disabled
EVENT STATUS
Increment
Decrement
Exit
SET EVENT TIME
All
Timed
ACTIVE PERIOD
Increment Hour
Decrement Hour
Increment Minute
Decrement Minute
Exit
SET TIME