Owner's manual

Vi-R4000 Series
Videoswitch Page 43 Mdr602a.doc
3.9.4 RS485 Local Control using DVR Protocols
A Vi-K2, Vi-K2A or Vi-K2000 joystick keyboard can be used to control PTZ domes connected to the Vi-
R4000. Connect the keyboard to a KBD port on the DVR and set up the keyboard menu such that
control is “via” DVR”.
Program the DVR for PTZ control as follows:
Before issuing the commands, issue an un-lock command as follows:
Press and hold LIVE key, enter 9001, release LIVE key
3.9.4.1 Enable RS485 Control on outputs 1 & 2
To configure a camera for PTZ control on RS485 outputs 1 & 2, enter this command:
Press and hold LIVE key, enter42XX, release LIVE key
Where XX is the camera number 01 to 16, or 00 for all cameras..
3.9.4.2 Enable RS485 Control on outputs 3 & 4
T To configure a camera for PTZ control on RS485 outputs 3 & 4 , enter this command:
Press and hold LIVE key, enter43XX, release LIVE key
Where XX is the camera number 01 to 16, or 00 for all cameras.
3.9.4.3 Set RS485 Protocol for Outputs 1 & 2
To set the PTZ protocol for RS485 outputs 1 & 2 , enter this command:
Press and hold LIVE key, enter45XX, release LIVE key
Where XX is the protocol number (see section
3.3).
3.9.4.4 Set RS485 Protocol for Outputs 3 & 4
To set the PTZ protocol for RS485 outputs 1 & 2 , enter this command:
Press and hold LIVE key, enter 46XX, release LIVE key
Where XX is the protocol number (see section
3.3)