User manual

Digital Recorder
55
+12V
0V Tx
Rx
Masthead Transceiver
TILLS Input of DVR
Pin 1
Pin 1
CAT5 Cable
Pin 5
Pin 5
Vi405 or Vi605
Wireless PIR
Masthead Unit
• Each of the external detectors must be configured with a different address
• Each PIR address that is to be used must be enabled in the DVRs ALARM menu
• Connect Wireless PIR Masthead Units to the TILLS input on the DVR as follows:
Masthead Unit
(Transceiver)
Screw Terminals
Vi405 or ViX05 DVR
“TILLS” RJ45 Connector
(CAT5)
TX Pin 1
0V Pin 5
Link +12V to RX Not connected
Intelligent Security and Fire Ltd