The electrical system to which the unit is
connected must be equipped with a bipolar
circuit breaker (Listed). The minimum
distance between the contacts must be
3mm (0.1in). The circuit breaker must be
provided with protection against the fault
current towards the ground (dierential)
and the overcurrent (magnetothermal,
Make sure that the power source and
connecting cables are suitable for the
power consumption of the system.
The power supply from the mains is to be connected
into terminal J1.
7 Maintaining and cleaning
Maintenance must be carried out by
personnel trained to operate on electrical
7.1.1 Fuses replacement
In case of accidental short circuit or fault to the
outputs, the protection fuse (FUS1) acts .
Should it need to be replaced, the OMEGA Brand, fuse
tted is the follow:
Model Number: FUS2ATUL
Alternatively, use a T 2A L 250V type fuse.
8 Disposal of waste
This symbol mark and recycle system
are applied only to EU countries and not
applied to the countries in the other area of
Your product is designed and manufactured with
high quality materials and components which can be
recycled and reused.
This symbol means that electrical and electronic
equipment, at their end-of-life, should be disposed of
separately from your household waste.
Please dispose of this equipment at your local
Community waste collection or Recycling centre.
In the European Union there are separate collection
systems for used electrical and electronic products.
9 Technical data
IRHPS230: IN 230Vac, 50/60Hz, 30W max - OUT 24Vac,
IRHPS120: IN 120Vac, 50/60,Hz, 30W max - OUT
Operating temperature: -50°C / +60°C
IP66/IP67 according to EN60529
EN55022, Class B
10 Technical drawings
The dimensions of the drawings are in
Fig. 2 IRHPS.
Headquarters Italy Videotec S.p.A.
Via Friuli, 6 - I-36015 - Schio (VI) Italy
Tel. +39 0445 697411 - Fax +39 0445 697414