Owner's manual

EN - English - Instructions manual
11
6.2 Contents and unpacking
When the product is delivered, make sure that the
package is intact and that there are no signs that it
has been dropped or scratched.
If there are obvious signs of damage, contact the
supplier immediately.
Keep the packaging in case you need to send the
product for repairs.
Check the contents to make sure they correspond
with the list of materials as below:
• Positioning unit ULISSE COMPACT THERMAL
• Accessories box:
• Serial extension cable
• Label
• Silicon sheath
• Ties
• Instructions manual
6.3 Safely disposing of
packaging material
The packaging material can all be recycled. The
installer technician will be responsible for separating
the material for disposal, and in any case for
compliance with the legislation in force where the
device is to be used.
Bear in mind that if the material has to be returned
due to a fault, using the original packaging for its
transport is strongly recommended.
6 Preparing the product
for use
h
Any change that is not expressly approved
by the manufacturer will invalidate the
guarantee.
h
All other parts must not be disassembled
or tampered (excepting for mounting and
maintenance operations according the
present manual).
6.1 Safety precautions before
use
h
The building must be equipped with a
20A maximum bipolar protection circuit
(magneto thermal), that must include a
bipolar automatic-type circuit breaker,
which must also envisage earth fault
current protection (magneto-thermal +
differential) with minimum distance of
3mm between contacts.
h
The appliance includes moving parts. Make
sure that the unit is positioned where it
is inaccessible under normal operating
conditions. Attach the warning label
supplied with the appliance, placing it near
the unit so that it can be seen easily.
Fig. 02