Technical information

Manual Voice Server Espero © Vidicode 2009
46
5 Configuration of the Ethernet interface
The Voice Server Espero has an Ethernet port. The network interface
supports the following protocols:
• FTP server
• SMTP client for sending E-mail messages to a SMTP server
• Telnet for remote configuration
• NTP for automated adjustments of the system clock
• A propriety protocol for streaming audio for real time remote
monitoring
FTP server is used by the Voice Server Setup program and the Call
Recorder Access System. The FTP server can also be used to give other
(custom) applications access to the recordings (on the FTP server) in the
Voice Server. It is even possible to open the Voice Server as a network
drive from a PC.
SMTP gives the recorder the ability to send e-mails. This has two
applications. Firstly the recorder can send voice mail or telephone
recordings to users. Secondly the recorder can send status updates to the
systems manager.
Telnet is a possibility to give a systems manager access to internal
menu’s from remote.
The NTP (Network Time Protocol) is a good method to provide accurate
time information with your voice mail and recordings.
Real time remote monitoring (RTRM) is available for users of the RTRM
PC software. It will be described later in this manual.
5.1 Network active
To begin the network configuration on the desktop model:
• Press the function key to enter the network settings.
On the 19” model:
• Press
• Press LAN
The display will show: